Pneumatic Air-Leg Rock Drill
Model:YT28
Selected configuration:Configuration to be confirmed
Selected reference:PFM-YT28
YT28 air-leg rock drill reference configuration: 26 kg, 80 × 60 mm cylinder/stroke, H22 × 108 shank and 34–42 mm range. The exact approved FT160-series suffix is quotation-controlled.
A YT28 reference configuration for preliminary matching. Final supplier model, air-leg interface, operating conditions and commercial terms are quotation-controlled.
Send the exact model or suffix, rock condition, hole diameter and depth, drilling direction, drill-steel interface, air pressure and flow, feed setup, quantity and delivery country.
| Rock Drill Weight | Approx. 26 kg |
|---|---|
| Impact Energy | Approx. 70 J at rated conditions |
| Impact Frequency | ≥34 Hz at 0.50 MPa; ≥36 Hz at 0.63 MPa |
| Air Consumption | ≤55 L/s at 0.50 MPa; ≤81 L/s at 0.63 MPa |
| Recommended Drilling Diameter | 34–42 mm |
| Working Air Pressure | 0.50–0.63 MPa at the tool inlet |
| Cylinder Diameter | 80 mm |
| Piston Stroke | 60 mm |
| Maximum Drilling Depth | Up to approximately 5 m |
| Shank Specification | H22 × 108 mm |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
H22 × 108 mm shank; 34–42 mm matched bit range
Tapered rod and bit system matched to hole depth, taper and rock condition
Confirm rod length, taper angle, bit diameter and bit design against the required hole depth, abrasiveness and local replacement preference.
Compatible FT160-series air leg
Air-leg configuration matched to drilling direction, feed length, working height and available space
Air-leg model naming and specifications can vary by manufacturer. Confirm the required feed stroke and installation interface against the supplied unit.
FY200B or compatible in-line lubricator
Lubricator and pneumatic-tool oil suitable for the selected hose and air-supply configuration
Continuous lubrication is essential. Lubricator setting and oil grade must follow the supplied operating manual and site conditions.
The valve system controls alternating compressed-air flow to the piston to support repeatable percussion and rotation cycles.
Buyer value
Supports stable drilling when air pressure at the tool inlet, lubrication and hose sizing are maintained within the required operating range.
Selection condition
Impact frequency and air consumption are pressure-specific. Hose losses, leakage and compressor capacity directly affect field performance.
The YT28 is operated with water flushing and a compatible air leg to provide feed support during underground, tunneling and rock-excavation drilling.
Buyer value
Enables a complete drilling setup that combines percussion, feed support, flushing, drill steel and bit selection around the job-site conditions.
Selection condition
Confirm air-leg model and feed length, water supply, drilling direction, rod lengths and bit range before quotation.
Final packaging, corrosion protection, crate or pallet method and shipping marks are confirmed in the written quotation.
Warranty, spare-parts scope and service terms are confirmed in the written quotation for the selected supplier configuration.
A complete YT28 system may include an approved FT160-series air leg; the exact suffix, mounting and feed travel are confirmed in the written quotation.
Ready to Confirm the Configuration?
We will confirm the drill body, shank and drill-steel interface, bit connection, dry or wet setup, air leg or feed, lubricator, hose and water setup, accessories, supply scope and export packing.
Product Evidence
A YT28 reference configuration for preliminary matching. Final supplier model, air-leg interface, operating conditions and commercial terms are quotation-controlled.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.
