Helmet and mounting hardware
KL5LM-C configuration review
Match mount type, retention and lamp/battery carrying arrangement.
Cordless or separate-battery configuration must refer to the actual unit.
Mining Cap Lamp
KL5LM-C Mining Headlamp
Model:KL5LM-C
Selected configuration:Configuration to be confirmed
Selected reference:PM-LAMP-001
KL5LM-C configuration and quotation guide
KL5LM-C Mining Headlamp. This personal cap/head-light enquiry starts with the exact model and suffix. Match the lamp, battery, charger and helmet mounting arrangement, then review the required shift, brightness mode and operating environment.
- KL5LM-C: A fleet enquiry can specify complete compatible sets and charging needs.
- Buyers can request evidence tied to the actual shift requirement.
- Configuration, included items and acceptance basis stated in the written quotation
Request a Configuration-Based Quote
Send exact lamp model and suffix; battery, charger and charging supply; required runtime, beam and mounting arrangement; operating environment and required certificate scope; quantity and delivery country. Not sure is accepted where identification is needed.
At a Glance
KL5LM-CModel / family identity
Mining Cap LampProduct type
Technical Specifications
| Model / family identity | KL5LM-C |
|---|---|
| Product type | Mining Cap Lamp |
| Product role | Personal cap/head light; exact model suffix and assembly form must be identified. |
| Mounting and format | Specify helmet mount and cordless or separate-battery arrangement. |
| Lighting requirement | State required output/beam, brightness mode and the test method used for comparison. |
| Shift requirement | State the required operating duration at the chosen brightness mode; no runtime is inferred from the model. |
| Battery and charger | Specify chemistry, voltage/capacity, charger input, connector and charging arrangement. |
| Environment and documentation | Identify site/mine classification and any required certificate number, model scope and revision. |
| Order configuration | The accepted quotation identifies the exact configuration, part/drawing revision, quantity and supplied items. This page is a configuration enquiry. |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Compatibility and Required Interfaces
Battery and charger
KL5LM-C configuration review
Match model/revision, electrical specification and connector.
Do not infer current, capacity or charger compatibility from the model number.
Operating environment
KL5LM-C configuration review
Review the exact model and applicable evidence against the site requirement.
A mining label does not itself establish explosion protection or approval.
Lighting, Battery and Charging Configuration
Lamp, battery and charger identified as a set
Lighting output and charging depend on the matched assembly and operating mode.
Buyer value
A fleet enquiry can specify complete compatible sets and charging needs.
Selection condition
Use actual electrical specifications and component identities.
Shift and brightness stated together
Runtime comparisons require a defined mode and measurement basis.
Buyer value
Buyers can request evidence tied to the actual shift requirement.
Selection condition
No unverified lumen, runtime or protection-rating figure is stated.
Configuration-specific quotation
The KL5LM-C enquiry is identified by its catalog model/family and the requested connection, application and supply scope.
Buyer value
The written offer can return a reviewable part/configuration identity and itemized supply list.
Selection condition
A model or page reference is not itself a complete order code; approve the offered configuration before ordering.
Application Scenarios
- Personal work-light enquiries with a specified environment and shift requirement
- Replacement of an identified lamp/battery/charger set
- Fleet charging and helmet-mount compatibility enquiries
Confirm Before Ordering
Configuration Inputs
- Exact model and suffix
- Cordless or separate battery design
- Helmet mount
- Light output/beam and test method
- Required shift duration and brightness mode
- Battery chemistry/voltage/capacity
- Charger input/connector and charge time
- Weight and protection rating
- Operating environment and mine classification
- Required certificate number/scope/version
- Quantity and charging stations
- Quantity, destination, required delivery window and inspection/packing requirements
Operating Limits
- No explosion-proof, intrinsically safe, ATEX, IECEx, MSHA or mine-approval claim is made without exact applicable evidence.
- 3A or 4A model labels are not interpreted as current or battery capacity.
- Model suffixes, batteries and chargers are not assumed interchangeable.
Quality and Pre-Shipment Checks
01
KL5LM-C identity and configuration check
Acceptance requirement: compare the offered item with the approved model/part/drawing revision.
This is an order-inspection requirement, not a completed inspection result or certification statement.
Agree checks covering exact model and suffix; cordless or separate battery design; helmet mount; light output/beam and test method before order release.
02
Interface and functional evidence
Acceptance requirement: agree the relevant dimensional and, where applicable, functional verification for the quoted configuration.
No test outcome or universal performance figure is claimed. The test arrangement and pass criteria must be tied to the actual offered item.
Use the agreed mining cap lamp drawing/data sheet and record the relevant connection, fit or operating conditions.
03
Supply, quantity and packing reconciliation
Acceptance requirement: match each delivered line item to the approved supply scope and packing list.
The required marks, protection and document scope must be written in the order.
Check item identification, quantity, visible condition and the agreed packaging/documentation.
Supply Scope, MOQ and Delivery
Minimum Order QuantityRequest a quotation for the required quantity and KL5LM-C configuration.
Lead TimeThe quotation states dispatch timing after the configuration, quantity and supply scope are agreed.
Available Supply Configurations
- Lamp, battery and charger components exactly as listed; inclusion and quantity must be stated in the quotation.
- Helmet mounts, charging stations and spares only when itemized; inclusion and quantity must be stated in the quotation.
Export Packing
Specify destination, transport method and required marks. Agree item separation, surface/connection protection and packing-list details for the KL5LM-C supply. Identify the transport and document requirements for the actual battery, engine or complete-equipment configuration.
Warranty and After-Sales
Request warranty and wear-part terms with the quotation. For KL5LM-C support, send the order reference, exact part/model identification, the affected component and operating conditions so the supplied configuration can be identified.
Safety and Maintenance Notes
Order Documentation
Commercial invoice and itemized packing list: agree required content with the order.
Origin, inspection, test or transport documents: state destination/project requirements before quotation; availability must be confirmed for the offered configuration.
Frequently Asked Questions
What does this KL5LM-C page identify?
This personal cap/head-light enquiry starts with the exact model and suffix. Match the lamp, battery, charger and helmet mounting arrangement, then review the required shift, brightness mode and operating environment.
Does the mining-lamp name prove hazardous-area approval?
No. Provide the operating environment and required approval. Review the certificate number, exact model/suffix, scope and revision for the offered configuration.
How should runtime be compared?
Specify the brightness mode, test method and required shift duration. Battery capacity or a model name alone does not establish practical runtime.
Which configuration details are needed for quotation?
Provide exact model and suffix; cordless or separate battery design; helmet mount; light output/beam and test method; required shift duration and brightness mode; battery chemistry/voltage/capacity. Also include charger input/connector and charge time; weight and protection rating; operating environment and mine classification; required certificate number/scope/version; quantity and charging stations, quantity and destination. The offer should state the exact configuration for approval.
What is included in the supply?
The quotation itemizes the supply. Typical enquiry lines are: lamp, battery and charger components exactly as listed; helmet mounts, charging stations and spares only when itemized. No unlisted accessory or mating component is assumed included.
How are quantity, delivery and inspection requirements agreed?
Send the required quantity, destination and any packing or inspection requirement with the KL5LM-C enquiry. MOQ, dispatch timing, warranty and document scope are stated in the written quotation for the agreed configuration.
Matched Battery, Charger and Mount
Helmet and mounting hardware: Match mount type, retention and lamp/battery carrying arrangement. Battery and charger: Match model/revision, electrical specification and connector. Operating environment: Review the exact model and applicable evidence against the site requirement.
Ready to Confirm the Configuration?
Request a Quote for KL5LM-C
Our technical sales team will review the mining cap lamp requirements, resolve the selected configuration and matching components, and state the agreed supply scope and delivery terms in the quotation.
- Product-specific quotation
- Interface confirmation
- Export packing options
Product Evidence
Product, Component, Configuration and Packing Views
KL5LM-C Mining Headlamp. This personal cap/head-light enquiry starts with the exact model and suffix. Match the lamp, battery, charger and helmet mounting arrangement, then review the required shift, brightness mode and operating environment.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.