Configuration Inputs
- Matched CIR65-compatible hammer identity
- Required hole diameter
- Tail-shank dimensions and spline profile
- Face profile and button layout
- Flushing-hole arrangement
- Rock formation and drilling conditions
CIR65 DTH Button Bit
Model:CIR65
Selected configuration:Configuration to be confirmed
Selected reference:Configuration required
CIR65 low-pressure DTH button bit for a confirmed CIR65-compatible hammer and mating interface. Exact diameter, shank/spline geometry, face, button and flushing configuration remain quotation-controlled because public CIR65 references are not fully consistent.
- CIR65 product/interface identity is explicitly controlled
- Order-specific geometry is confirmed before release instead of inferred
- Inspection can be aligned to the approved bit specification
Request a Configuration-Based Quote
Send the hammer shank, bit diameter, face and button layout, flushing and foot-valve requirement, rock condition, quantity and delivery country.
At a Glance
Low-pressure DTH button bitTool Type
Technical Specifications
| Tool Type | Low-pressure DTH button bit |
|---|---|
| Matched Hammer Interface | Confirm the exact hammer/shank mating interface before order release |
| Face / Button / Flushing Geometry | Order-specific; confirm the approved geometry in the quotation or drawing |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Application Scenarios
- Mining and quarry rock drilling
- Water-well drilling
- Construction rock drilling
Confirm Before Ordering
Operating Limits
- Use only after the CIR65 hammer/mating interface is confirmed
- Do not select or substitute by nominal diameter or visual similarity alone
- Exact bit geometry must match the approved quotation, drawing or sample
Supply Scope, MOQ and Delivery
Minimum Order QuantityConfirmed by quotation
Lead TimeConfirmed after configuration and quantity are locked
Available Supply Configurations
- CIR65 DTH Button Bit × ordered quantity
Export Packing
Export packing according to selected bit configuration, order quantity and shipping method. Buyer labeling or special packing requirements should be stated in the RFQ.
Warranty and After-Sales
After-sales review is based on the approved order specification, supplied configuration and documented operating conditions. Provide the order reference, photos and operating context for technical review.
Safety and Maintenance Notes
Frequently Asked Questions
Can I order a DTH bit by hole diameter alone?
No. Similar nominal diameters can exist across different interface families. Confirm the matched hammer/shank interface and exact bit geometry together.
Are CIR-family DTH bits automatically interchangeable?
No. Confirm the actual mating profile, critical dimensions and approved configuration before substitution or repeat ordering.
What information should I send for a DTH bit quotation?
Send the matched hammer model, target hole diameter, current bit photos or drawing if available, face/button preference, rock condition, quantity and destination.
Are the hammer and drill pipe included with the bit?
Not unless the written quotation explicitly lists them. System components should be requested and itemized separately in the RFQ.
Ready to Confirm the Configuration?
Request a Quote for CIR65
We will confirm the hammer shank, diameter, face and button layout, flushing arrangement, foot-valve requirement, operating conditions and export packing.
- Product-specific quotation
- Interface confirmation
- Export packing options