Configuration Inputs
- Matched CIR150 hammer identity
- Target hole diameter
- Exact tail-shank dimensions and spline geometry
- Face profile and button layout
- Flushing-hole arrangement
- Rock formation and drilling conditions
CIR150 DTH Button Bit
Model:CIR150
Selected configuration:Configuration to be confirmed
Selected reference:Configuration required
CIR150 low-pressure DTH button bit for a confirmed CIR150-compatible hammer/shank interface. Published references place the family in the roughly 150–200 mm class, while exact shank, face, button and flushing geometry remain quotation-controlled.
- CIR150 interface-family identity is explicitly controlled
- Order-specific geometry is confirmed instead of inferred from nominal diameter
- Inspection can be aligned to the approved bit specification
Request a Configuration-Based Quote
Send the hammer shank, bit diameter, face and button layout, flushing and foot-valve requirement, rock condition, quantity and delivery country.
At a Glance
Low-pressure DTH button bitTool Type
Technical Specifications
| Tool Type | Low-pressure DTH button bit |
|---|---|
| Matched Hammer Interface | Confirm the exact hammer/shank mating interface before order release |
| Face / Button / Flushing Geometry | Order-specific; confirm the approved geometry in the quotation or drawing |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Application Scenarios
- Mining and quarry rock drilling
- Water-well drilling
- Construction rock drilling
Confirm Before Ordering
Operating Limits
- Use only with a confirmed CIR150-compatible hammer/shank interface
- Do not substitute CIR130 or CIR170 family parts by nominal diameter alone
- Exact bit geometry must match the approved quotation, drawing or sample
Supply Scope, MOQ and Delivery
Minimum Order QuantityConfirmed by quotation
Lead TimeConfirmed after configuration and quantity are locked
Available Supply Configurations
- CIR150 DTH Button Bit × ordered quantity
Export Packing
Export packing according to selected bit size, order quantity and shipping method. Buyer labeling or special packing requirements should be stated in the RFQ.
Warranty and After-Sales
After-sales review is based on the approved order specification, supplied configuration and documented operating condition. Provide order reference, photos and operating context for technical review.
Safety and Maintenance Notes
Frequently Asked Questions
Can I order a DTH bit by hole diameter alone?
No. Similar nominal diameters can exist across different interface families. Confirm the matched hammer/shank interface and exact bit geometry together.
Are CIR-family DTH bits automatically interchangeable?
No. Confirm the actual mating profile, critical dimensions and approved configuration before substitution or repeat ordering.
What information should I send for a DTH bit quotation?
Send the matched hammer model, target hole diameter, current bit photos or drawing if available, face/button preference, rock condition, quantity and destination.
Are the hammer and drill pipe included with the bit?
Not unless the written quotation explicitly lists them. System components should be requested and itemized separately in the RFQ.
Ready to Confirm the Configuration?
Request a Quote for CIR150
We will confirm the hammer shank, diameter, face and button layout, flushing arrangement, foot-valve requirement, operating conditions and export packing.
- Product-specific quotation
- Interface confirmation
- Export packing options