Configuration Inputs
- Matched hammer or existing CIR130 bit identity
- Target hole diameter
- Exact tail-shank dimensions and spline profile
- Face profile and button layout
- Flushing-hole arrangement
- Rock formation and drilling conditions
CIR130 DTH Button Bit
Model:CIR130
Selected configuration:Configuration to be confirmed
Selected reference:Configuration required
CIR130 low-pressure DTH button bit for an order-confirmed CIR130-compatible mating system. Exact diameter, tail-shank geometry, face, button and flushing configuration are quotation-controlled to prevent model or configuration mixing.
- CIR130 family identity is explicitly controlled
- Order-specific mating and cutting geometry are confirmed before release
- Inspection can be aligned to the approved bit specification
Request a Configuration-Based Quote
Send the hammer shank, bit diameter, face and button layout, flushing and foot-valve requirement, rock condition, quantity and delivery country.
At a Glance
Low-pressure DTH button bitTool Type
Technical Specifications
| Tool Type | Low-pressure DTH button bit |
|---|---|
| Matched Hammer Interface | Confirm the exact hammer/shank mating interface before order release |
| Face / Button / Flushing Geometry | Order-specific; confirm the approved geometry in the quotation or drawing |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Application Scenarios
- Mining and quarry rock drilling
- Water-well drilling
- Construction rock drilling
Confirm Before Ordering
Operating Limits
- Use only after confirming the actual CIR130-compatible mating system
- Do not substitute CIR110 or other CIR-family bits by nominal diameter or appearance alone
- Exact bit geometry must match the approved quotation, drawing or retained sample
Supply Scope, MOQ and Delivery
Minimum Order QuantityConfirmed by quotation
Lead TimeConfirmed after configuration and quantity are locked
Available Supply Configurations
- CIR130 DTH Button Bit × ordered quantity
Export Packing
Export packing according to selected bit size, order quantity and shipping method. Buyer labeling or special packing requirements should be stated in the RFQ.
Warranty and After-Sales
After-sales review is based on the approved order specification, supplied configuration and documented operating condition. Provide order reference, photos and operating context for technical review.
Safety and Maintenance Notes
Frequently Asked Questions
Can I order a DTH bit by hole diameter alone?
No. Similar nominal diameters can exist across different interface families. Confirm the matched hammer/shank interface and exact bit geometry together.
Are CIR-family DTH bits automatically interchangeable?
No. Confirm the actual mating profile, critical dimensions and approved configuration before substitution or repeat ordering.
What information should I send for a DTH bit quotation?
Send the matched hammer model, target hole diameter, current bit photos or drawing if available, face/button preference, rock condition, quantity and destination.
Are the hammer and drill pipe included with the bit?
Not unless the written quotation explicitly lists them. System components should be requested and itemized separately in the RFQ.
Ready to Confirm the Configuration?
Request a Quote for CIR130
We will confirm the hammer shank, diameter, face and button layout, flushing arrangement, foot-valve requirement, operating conditions and export packing.
- Product-specific quotation
- Interface confirmation
- Export packing options