Drill steel and bit
Y20LY configuration review
Match the machine shank/chuck and the rod-to-bit connection separately.
A model label or visual similarity does not establish fit.
Pneumatic Rock Drill
Perforadora neumática manual Y20LY
Model:Y20LY
Selected configuration:Configuration to be confirmed
Selected reference:PM-RD-012
Lightweight 18 kg rock drill for 34–40 mm quarry and construction holes
Y20LY es una perforadora neumática manual ligera de 18 kg para barrenos de 34–40 mm en roca de dureza media a dura. Su vástago de H22 × 108 mm y su consumo de aire de referencia de ≤21,5 L/s la hacen práctica para canteras, minería, construcción y perforación secundaria donde la portabilidad es importante.
- El cuerpo portátil de 18 kg mejora la facilidad de transporte para trabajos de perforación móviles
- Rango de perforación de 34–40 mm con herramientas comunes H22 × 108 mm
- El bajo consumo de aire de referencia de ≤21.5 L/s ayuda a reducir la demanda del compresor
Request a Configuration-Based Quote
Send the exact model or suffix, rock condition, hole diameter and depth, drilling direction, drill-steel interface, air pressure and flow, feed setup, quantity and delivery country.
At a Glance
Y20LYModel / family identity
Pneumatic Rock DrillProduct type
Technical Specifications
| Model / family identity | Y20LY |
|---|---|
| Product type | Pneumatic Rock Drill |
| Operating system | Compressed-air rock drilling; drill steel and bit are separate matched components. |
| Tooling connection | Identify the machine shank cross-section and length, chuck fit, rod length and bit-end connection. |
| Hole selection | Specify hole diameter, depth, rock/material and drilling direction together. |
| Air supply | Use working pressure and delivered airflow at the tool; provide hose and coupling details. |
| Flushing | The selected version must support the requested flushing or dust-control arrangement; water flushing is not assumed. |
| Order configuration | The accepted quotation identifies the exact configuration, part/drawing revision, quantity and supplied items. This page is a configuration enquiry. |
| Inquiry reference | PM-RD-012 is the existing page/variant reference, not a complete order code. |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Compatibility and Required Interfaces
Air and flushing system
Y20LY configuration review
Match inlet, hose, couplings, delivered air and any supported flushing path.
Use the supplied-version operating instructions and site arrangement.
Pneumatic Drilling Performance
Connected tooling selection
Impact passes through the drill steel to the bit.
Buyer value
Reviewing the whole chain reduces mismatched body, steel and bit enquiries.
Selection condition
Confirm both the machine interface and the bit-end connection.
Air delivery at the tool
The hose and coupling arrangement influences the air delivered by the compressor.
Buyer value
The enquiry can reflect the actual site supply rather than a compressor label alone.
Selection condition
Use supplied-version pressure and airflow requirements.
Configuration-specific quotation
The Y20LY enquiry is identified by its catalog model/family and the requested connection, application and supply scope.
Buyer value
The written offer can return a reviewable part/configuration identity and itemized supply list.
Selection condition
A model or page reference is not itself a complete order code; approve the offered configuration before ordering.
Application Scenarios
- Consultas sobre perforación en canteras y trabajos en piedra
- Consultas sobre perforación de pozos para construcción y minería con herramientas verificadas y condiciones de obra
- Consultas sobre herramientas de repuesto respaldadas por la placa del modelo antiguo y las dimensiones de conexión
Confirm Before Ordering
Configuration Inputs
- Modelo exacto y revisión suministrada
- Diámetro y profundidad del orificio
- Roca/material y dirección de perforación
- Sección transversal y longitud del vástago de acero de perforación
- Conexión del extremo de la broca y longitud de la barra
- Presión y flujo de aire disponibles
- Tamaño de la entrada de aire y de la manguera/acoplador
- Disposición para agua/lavado o control de polvo
- Solo el cuerpo o accesorios y repuestos especificados
- Cantidad, destino, plazo de entrega requerido y requisitos de inspección/embalaje
Operating Limits
- No asuma que todos los modelos Y o YT comparten la misma espiga o especificación de aire/lavado.
- Las columnas de avance (air legs) y los accesorios solo se incluyen cuando se indica la versión exacta compatible.
Quality and Pre-Shipment Checks
01
Y20LY identity and configuration check
Acceptance requirement: compare the offered item with the approved model/part/drawing revision.
This is an order-inspection requirement, not a completed inspection result or certification statement.
Agree checks covering exact model and supplied revision; hole diameter and depth; rock/material and drilling direction; drill-steel shank cross-section and length before order release.
02
Interface and functional evidence
Acceptance requirement: agree the relevant dimensional and, where applicable, functional verification for the quoted configuration.
No test outcome or universal performance figure is claimed. The test arrangement and pass criteria must be tied to the actual offered item.
Use the agreed pneumatic rock drill drawing/data sheet and record the relevant connection, fit or operating conditions.
03
Supply, quantity and packing reconciliation
Acceptance requirement: match each delivered line item to the approved supply scope and packing list.
The required marks, protection and document scope must be written in the order.
Check item identification, quantity, visible condition and the agreed packaging/documentation.
Supply Scope, MOQ and Delivery
Minimum Order QuantitySolicite una cotización por la cantidad requerida y la configuración Y20LY.
Lead TimeLa cotización indica el plazo de envío una vez acordados la configuración, la cantidad y el alcance del suministro.
Available Supply Configurations
- Cuerpo de perforadora identificado; la inclusión y la cantidad deben indicarse en la cotización.
- Acero de perforación y barrena correspondientes si se detallan; la inclusión y la cantidad deben indicarse en la cotización.
- Manguera, acopladores, lubricador, soporte neumático y repuestos solo si se detallan; la inclusión y la cantidad deben indicarse en la cotización.
Export Packing
Especifique el destino, el método de transporte y las marcas requeridas. Acuerde la separación de los artículos, la protección de superficies/conexiones y los detalles de la lista de empaque para el suministro Y20LY.
Warranty and After-Sales
Solicite los términos de garantía y piezas de desgaste junto con la cotización. Para soporte técnico de Y20LY, envíe la referencia del pedido, la identificación exacta de la pieza/modelo, el componente afectado y las condiciones de operación para poder identificar la configuración suministrada.
Safety and Maintenance Notes
Order Documentation
Factura comercial y lista de empaque detallada: acuerde el contenido requerido con el pedido.
Documentos de origen, inspección, prueba o transporte: indique los requisitos del destino/proyecto antes de la cotización; la disponibilidad debe confirmarse para la configuración ofrecida.
Frequently Asked Questions
What hole size is the Y20LY designed for?
The typical drilling diameter is 34–40 mm.
What shank does the Y20LY use?
The standard reference is H22 × 108 ±1 mm.
How much compressed air does the Y20LY require?
Use up to 21.5 L/s at the rated 0.4 MPa working condition as the reference, then allow for hose and coupling losses.
Can the Y20LY be used with an air leg?
Yes. It can be used handheld or matched with an FT100 air leg for supported horizontal or inclined drilling.
Can the Y20LY drill wet and dry?
Yes. It is suitable for dry or wet drilling in medium-hard to hard rock when the flushing setup is matched to the job.
What information should I send for a quotation?
Send target hole diameter and depth, rock type, drilling direction, compressor pressure and airflow, tooling, quantity and destination.
Required Drill-Steel, Air and Feed Interfaces
Match the H22 × 108 mm drill steel and bit to the target 34–40 mm hole and rock condition. For compressor selection, check 0.4 MPa working pressure, ≤21.5 L/s air demand, hose bore and hose length. FT100 air-leg support can be added where required.
Ready to Confirm the Configuration?
Request a Quote for Y20LY
We will confirm the drill body, shank and drill-steel interface, bit connection, dry or wet setup, air leg or feed, lubricator, hose and water setup, accessories, supply scope and export packing.
- Product-specific quotation
- Interface confirmation
- Export packing options
Product Evidence
Product, Component, Configuration and Packing Views
Y20LY es una perforadora neumática manual ligera de 18 kg para barrenos de 34–40 mm en roca de dureza media a dura. Su vástago de H22 × 108 mm y su consumo de aire de referencia de ≤21,5 L/s la hacen práctica para canteras, minería, construcción y perforación secundaria donde la portabilidad es importante.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.