Drilling or breaking tooling
YN27C configuration review
Match the supplied unit’s shank, chuck, retainer and operating mode.
A bit/rod setup and a breaker chisel are separate tool selections.
Gasoline Rock Drill
Perforadora de roca a gasolina YN27C
Model:YN27C
Selected configuration:Configuration to be confirmed
Selected reference:PM-RD-015
Self-contained gasoline rock drill for remote drilling and breaking work
La YN27C es una perforadora de roca a gasolina autónoma para lugares remotos donde no es práctico contar con un compresor o una fuente de alimentación independiente. La máquina de 27 kg utiliza un motor de dos tiempos de 185 cm³, un vástago hexagonal de 22 × 108 mm y admite trabajos de perforación o demolición con el utillaje correspondiente.
- La alimentación autónoma por gasolina elimina la necesidad de un compresor externo
- El utillaje hexagonal de 22 × 108 mm es compatible con las aplicaciones comunes de perforación de roca
- Una sola máquina puede configurarse para perforar o romper en trabajos de campo en ubicaciones remotas
Request a Configuration-Based Quote
Send exact model, nameplate and manual reference; tool shank and matched drill steel or working tool; drilling or breaking task, material and hole dimensions; engine, fuel instructions and required supply scope; quantity and delivery country. Not sure is accepted where identification is needed.
At a Glance
YN27CModel / family identity
Gasoline Rock DrillProduct type
Technical Specifications
| Model / family identity | YN27C |
|---|---|
| Product type | Gasoline Rock Drill |
| Power type | Gasoline / internal-combustion engine; use the offered version’s fuel, oil and operating instructions. |
| Operating mode | State drilling or breaking; tooling and permitted operation must match the selected configuration. |
| Tool interface | Verify shank/chuck dimensions and the retainer; identify rods, bits and chisels separately. |
| Engine configuration | Provide the model plate and engine revision for fuel instructions, starter and spare-parts matching. |
| Site conditions | Identify the work location and ventilation before equipment selection. |
| Engine format — model reference | Single-cylinder, two-stroke, fan-cooled. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Main machine weight — model reference | 27 kg. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Overall dimensions — model reference | 746 × 315 × 229 mm. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Engine displacement — model reference | 185 cm³. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Shank reference — model reference | H22 × 108 mm or H25 × 108 mm listed separately; the required chuck/shank version must be identified. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Maximum drilling depth — model reference | 6 m published maximum-depth reference; actual attainable depth depends on the offered configuration and site. Wuhan Superdrill YN27C catalogue comparison only; not a PerfoMax supplied specification, fitment approval or operating instruction. |
| Order configuration | The accepted quotation identifies the exact configuration, part/drawing revision, quantity and supplied items. This page is a configuration enquiry. |
| Inquiry reference | PM-RD-015 is the existing page/variant reference, not a complete order code. |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Compatibility and Required Interfaces
Engine and service parts
YN27C configuration review
Use the exact YN27C engine/body revision and component part number.
A Pionjar 120 name or similar appearance does not prove interchangeability.
Gasoline Drill Configuration
Engine-powered equipment selection
A gasoline engine is the power source for the identified model.
Buyer value
The enquiry can distinguish engine-powered equipment from compressor-dependent alternatives.
Selection condition
Confirm the actual engine revision and suitability for the operating location.
Mode-specific tooling
Drilling and breaking require the appropriate working tool and retained connection.
Buyer value
Itemizing the operation helps avoid a tool set that does not fit the intended work.
Selection condition
Follow the offered-version instructions; do not infer interchangeable tooling.
Configuration-specific quotation
The YN27C enquiry is identified by its catalog model/family and the requested connection, application and supply scope.
Buyer value
The written offer can return a reviewable part/configuration identity and itemized supply list.
Selection condition
A model or page reference is not itself a complete order code; approve the offered configuration before ordering.
Application Scenarios
- Consultas sobre perforadoras de roca portátiles donde la unidad motorizada seleccionada sea adecuada para el sitio
- Consultas sobre martillos rompedores con cincel y retenedor identificados por separado
- Consultas sobre recambios para YN27C con identificación del motor y del cuerpo de la herramienta
Confirm Before Ordering
Configuration Inputs
- Modelo exacto suministrado y placa de identificación
- Instrucciones del motor y de combustible/aceite
- Operación de perforación o rotura
- Diámetro/profundidad del orificio o servicio de rotura
- Dimensiones del vástago/mandril y retenedor
- Identificación de la varilla/broca/cincel
- Ubicación de operación y ventilación
- Revisión del motor de arranque/motor/repuestos
- Alcance del suministro
- Cantidad, destino, plazo de entrega requerido y requisitos de inspección/embalaje
Operating Limits
- YN27C no se representa como equivalente a Pionjar 120.
- La mezcla de combustible, los ajustes de mantenimiento y las restricciones de funcionamiento siguen las instrucciones suministradas; no se indica un ajuste universal.
Quality and Pre-Shipment Checks
01
YN27C identity and configuration check
Acceptance requirement: compare the offered item with the approved model/part/drawing revision.
This is an order-inspection requirement, not a completed inspection result or certification statement.
Agree checks covering exact supplied model and nameplate; engine and fuel/oil instructions; drilling or breaking operation; hole diameter/depth or breaking duty before order release.
02
Interface and functional evidence
Acceptance requirement: agree the relevant dimensional and, where applicable, functional verification for the quoted configuration.
No test outcome or universal performance figure is claimed. The test arrangement and pass criteria must be tied to the actual offered item.
Use the agreed gasoline rock drill drawing/data sheet and record the relevant connection, fit or operating conditions.
03
Supply, quantity and packing reconciliation
Acceptance requirement: match each delivered line item to the approved supply scope and packing list.
The required marks, protection and document scope must be written in the order.
Check item identification, quantity, visible condition and the agreed packaging/documentation.
Supply Scope, MOQ and Delivery
Minimum Order QuantitySolicite una cotización por la cantidad requerida y la configuración del YN27C.
Lead TimeEl presupuesto indica el plazo de entrega una vez acordados la configuración, la cantidad y el alcance del suministro.
Available Supply Configurations
- Cuerpo y motor del YN27C en la revisión cotizada; la inclusión y la cantidad deben indicarse en la cotización.
- Acero/broca de perforación o herramienta de ruptura solo cuando se detallen; la inclusión y la cantidad deben indicarse en la cotización.
- Arrancador, piezas de servicio y accesorios solo cuando se detallen; la inclusión y la cantidad deben indicarse en la cotización.
Export Packing
Especifique el destino, el método de transporte y las marcas requeridas. Acuerde la separación de artículos, la protección de superficies/conexiones y los detalles de la lista de empaque para el suministro del YN27C. Identifique los requisitos de transporte y documentación para la batería, el motor o la configuración del equipo completo.
Warranty and After-Sales
Solicite los términos de garantía y piezas de desgaste junto con la cotización. Para asistencia con el YN27C, envíe la referencia del pedido, la identificación exacta de la pieza o modelo, el componente afectado y las condiciones de operación para que se pueda identificar la configuración suministrada.
Safety and Maintenance Notes
Order Documentation
Factura comercial y lista de empaque detallada: acuerde el contenido requerido con el pedido.
Documentos de origen, inspección, prueba o transporte: indique los requisitos de destino/proyecto antes de cotizar; la disponibilidad debe confirmarse para la configuración ofrecida.
Frequently Asked Questions
Does the YN27C require an external air compressor?
No. It is a self-contained internal-combustion rock drill with its own engine and compression mechanism.
What shank does the YN27C use?
The most widely documented configuration uses a Hex 22 × 108 mm shank.
How deep can the YN27C drill?
Published references state up to 6 m. Practical drilling depth depends on rock condition, tooling and operating technique.
What hole diameter is typical for the YN27C?
Current model references commonly place the YN27C around 28–42 mm.
Can the YN27C also be used for breaking?
Yes. With the correct working tool and configuration, the YN27C can be used for drilling as well as breaking, splitting and related impact work.
What engine does the YN27C use?
The common reference is a single-cylinder, air-cooled two-stroke gasoline engine with 185 cm³ displacement.
What should I send for a YN27C quotation?
Send the intended drilling or breaking application, hole size and depth, rock condition, tooling, quantity and destination. For replacement or spare-part enquiries, include machine and engine identification photos.
Matched Drill Steel and Engine Setup
Choose drilling or breaking tooling to match the Hex 22 × 108 mm interface and intended operation. For replacement or service parts, use the exact YN27C machine and engine revision shown on the nameplate.
Ready to Confirm the Configuration?
Request a Quote for YN27C
Our technical sales team will review the gasoline rock drill requirements, resolve the selected configuration and matching components, and state the agreed supply scope and delivery terms in the quotation.
- Product-specific quotation
- Interface confirmation
- Export packing options
Product Evidence
Product, Component, Configuration and Packing Views
La YN27C es una perforadora de roca a gasolina autónoma para lugares remotos donde no es práctico contar con un compresor o una fuente de alimentación independiente. La máquina de 27 kg utiliza un motor de dos tiempos de 185 cm³, un vástago hexagonal de 22 × 108 mm y admite trabajos de perforación o demolición con el utillaje correspondiente.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.