Handheld Pneumatic Rock Drill
Model:Y6
Selected configuration:Configuration to be confirmed
Selected reference:PM-RD-006
Y6 configuration and quotation guide
Y6 is a handheld pneumatic rock-drill model for buyers comparing light-duty tools for quarry, stone and construction drilling. Match the selected Y6 version to the hole, drill steel and site air supply. The approximately 6 kg model reference describes a comparison class; the quotation must identify the actual supplied configuration.
Send the exact model or suffix, rock condition, hole diameter and depth, drilling direction, drill-steel interface, air pressure and flow, feed setup, quantity and delivery country.
| Model | Y6 |
|---|---|
| Product type | Handheld pneumatic rock drill |
| Power source | Compressed air; match working pressure and delivered airflow to the supplied-version data sheet. |
| Weight reference | Approximately 6 kg in an exact-model manufacturer reference; comparison value, not the supplied-unit specification. |
| Overall length reference | 426 mm in an exact-model manufacturer reference; verify the offered version and any accessories. |
| Drill-steel interface | Shank cross-section, dimensions, chuck fit and rod/bit connection require version-specific verification; no universal Y6 shank claim. |
| Hole requirement | Provide target diameter, depth, rock/material and drilling direction; the model name alone does not establish capacity. |
| Flushing and dust control | State the required method and verify the supplied configuration; water flushing is not assumed. |
| Air-line connection | Specify hose bore, inlet/coupler standard and lubrication arrangement against the actual site air system. |
| Page reference | PM-RD-006 identifies this configuration enquiry; it is not a complete order code. |
| Supply scope | Drill body and each tooling/accessory item are controlled by the accepted quotation and packing list. |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Selected Y6 supplied version
Verify shank cross-section and dimensions, chuck fit, rod length and bit-end connection.
Send the old tool and steel identification or a measured drawing. The Y6 name alone does not establish interchangeability.
Compressor, hose, coupler and lubricator
Match working pressure and delivered airflow at the tool, hose bore and inlet/coupler standard.
Account for the actual hose arrangement; confirm the approved pressure and lubrication requirements in the supplied-version instructions.
Job-specific control method
Identify whether the offered version and tooling support the requested method.
Do not infer a water-flushing circuit from the Y6 name or a similar drill photograph.
A handheld pneumatic drill transmits impact through the drill steel while the operator positions the tool.
Buyer value
Useful when comparing a hand-positioned tool with supported or rig-mounted systems.
Selection condition
Suitability depends on material, hole requirement, drilling direction and the identified Y6 version.
The compressor, hose and coupling arrangement determine the air delivered to the tool.
Buyer value
Specifying the site arrangement gives the quotation a practical operating basis.
Selection condition
Use the selected version’s data sheet; published Y6 airflow and pressure figures are not treated as universal.
Chuck fit, drill-steel dimensions and the rod-to-bit connection all contribute to a compatible setup.
Buyer value
A single enquiry can identify the required tool body and the correct tooling scope.
Selection condition
Approval requires the actual mating dimensions or an existing confirmed configuration, not visual resemblance.
Model and supplied-version identification
Acceptance requirement: match Y6 model identification and the version stated in the quotation.
This is a proposed order check, not a completed inspection or a certificate claim.
Agree the nameplate, data-sheet revision and itemized accessory record before order release.
Interface and operating checks
Acceptance requirement: verify the agreed chuck/tooling fit, air connection and requested functional checks.
The operating setup and pass criteria must be agreed for the offered configuration; no test result is claimed here.
Record measured connection details and, if contracted, the operating test conditions and findings.
Supply and packing reconciliation
Acceptance requirement: reconcile the drill body and every quoted accessory with the packing list.
Apply the packing and marking requirements written in the order.
Check quantity, item identification, visible condition and agreed packing protection.
Specify destination, transport method and packing requirements. The quotation should state corrosion protection, tool and accessory separation, shipping marks and the packing list for the selected Y6 configuration.
Request the warranty and wear-part terms with the quotation. For a Y6 support enquiry, send the order reference, model plate, affected component and operating air, tooling and material details so the configuration can be identified.
Drill steel and bit: Verify shank cross-section and dimensions, chuck fit, rod length and bit-end connection. Air system: Match working pressure and delivered airflow at the tool, hose bore and inlet/coupler standard. Flushing and dust-control arrangement: Identify whether the offered version and tooling support the requested method.
Ready to Confirm the Configuration?
We will confirm the drill body, shank and drill-steel interface, bit connection, dry or wet setup, air leg or feed, lubricator, hose and water setup, accessories, supply scope and export packing.
Product Evidence
Y6 is a handheld pneumatic rock-drill model for buyers comparing light-duty tools for quarry, stone and construction drilling. Match the selected Y6 version to the hole, drill steel and site air supply. The approximately 6 kg model reference describes a comparison class; the quotation must identify the actual supplied configuration.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.