Chisel, moil and retainer
ML33 configuration review
Match the exact body, shank, collar and retainer geometry.
Tip shape alone does not determine compatibility.
Pneumatic Pick / Breaker
Martillo neumático ML33
Model:ML33
Selected configuration:Configuration to be confirmed
Selected reference:PM-BRK-013
ML33 configuration and quotation guide
Martillo neumático ML33. Esta consulta sobre herramientas de impacto por aire comprimido abarca equipos de rotura o cincelado. Haga coincidir la punta de trabajo, el vástago y el retenedor con el cuerpo identificado, luego verifique la posición de trabajo y el aire disponible en la herramienta.
- ML33: Una consulta sobre un puntero o cincel específico para la tarea puede identificar la forma de herramienta requerida, así como el cuerpo.
- El registro de la disposición del sitio respalda una combinación útil entre el cuerpo y el sistema de aire.
- Configuración, artículos incluidos y base de aceptación indicados en el presupuesto por escrito
Request a Configuration-Based Quote
Send the exact model, breaking material, working direction, tool shank, compressor output, hose setup, quantity and delivery country.
At a Glance
ML33Model / family identity
Pneumatic Pick / BreakerProduct type
Technical Specifications
| Model / family identity | ML33 |
|---|---|
| Product type | Pneumatic Pick / Breaker |
| Operating system | Compressed-air impact breaking/chipping; this is not a rotary hole-drilling system. |
| Working tool | Specify moil, chisel or other tip form and working/overall length. |
| Retention interface | Match shank cross-section and dimensions, collar and retainer geometry. |
| Work requirement | Identify material, removal/breaking task, direction, access and intended duty. |
| Air-line configuration | Specify pressure and delivered flow, inlet thread, hose/coupling and lubrication arrangement. |
| Order configuration | The accepted quotation identifies the exact configuration, part/drawing revision, quantity and supplied items. This page is a configuration enquiry. |
Final interface dimensions, selected configuration and supply scope are stated in the formal quotation or approved drawing.
Compatibility and Required Interfaces
Compressor and air-line equipment
ML33 configuration review
Check delivered pressure/flow, hose bore, inlet and coupling standard.
Use the data sheet for the quoted model and configuration.
Pneumatic Impact Design
Working end selected for the task
The retained tool transfers the body’s impact into the material.
Buyer value
A task-specific moil or chisel enquiry can identify the required tool form as well as the body.
Selection condition
Material and access must suit the selected duty and working tool.
Complete air-line specification
Pressure and flow reach the breaker through the hose and couplings.
Buyer value
Recording the site arrangement supports a usable body-and-air-system match.
Selection condition
Do not infer actual output from a model number or nominal compressor rating.
Configuration-specific quotation
The ML33 enquiry is identified by its catalog model/family and the requested connection, application and supply scope.
Buyer value
The written offer can return a reviewable part/configuration identity and itemized supply list.
Selection condition
A model or page reference is not itself a complete order code; approve the offered configuration before ordering.
Application Scenarios
- Selección de material para romper o astillar según la función identificada de la herramienta
- Consultas sobre retirada en carreteras, construcción, piedra o minería tras cotejar el material y la posición de trabajo
- Consultas sobre sustitución de flota con el modelo exacto y las dimensiones de la herramienta existente
Confirm Before Ordering
Configuration Inputs
- Modelo exacto y revisión
- Material y tarea de remoción/demolición
- Dirección de trabajo y acceso
- Forma y dimensiones del vástago de la herramienta
- Geometría del retenedor y el collarín
- Forma y longitud de la punta/cincel/hoja
- Presión y flujo de aire disponibles
- Entrada de aire y manguera/acoplamiento
- Requisitos de lubricación
- Alcance de suministro de cuerpo solo/herramental/repuestos
- Cantidad, destino, plazo de entrega requerido y requisitos de inspección/embalaje
Operating Limits
- Un número de modelo no garantiza el peso, la energía de impacto ni el tamaño universal del cincel.
- La intercambiabilidad de herramientas/repuestos entre fabricantes originales (OEM) o entre diferentes modelos requiere una verificación de las piezas o de sus dimensiones.
Quality and Pre-Shipment Checks
01
ML33 identity and configuration check
Acceptance requirement: compare the offered item with the approved model/part/drawing revision.
This is an order-inspection requirement, not a completed inspection result or certification statement.
Agree checks covering exact model and revision; material and removal/breaking task; working direction and access; tool shank shape and dimensions before order release.
02
Interface and functional evidence
Acceptance requirement: agree the relevant dimensional and, where applicable, functional verification for the quoted configuration.
No test outcome or universal performance figure is claimed. The test arrangement and pass criteria must be tied to the actual offered item.
Use the agreed pneumatic pick / breaker drawing/data sheet and record the relevant connection, fit or operating conditions.
03
Supply, quantity and packing reconciliation
Acceptance requirement: match each delivered line item to the approved supply scope and packing list.
The required marks, protection and document scope must be written in the order.
Check item identification, quantity, visible condition and the agreed packaging/documentation.
Supply Scope, MOQ and Delivery
Minimum Order QuantitySolicite una cotización para la cantidad requerida y la configuración ML33.
Lead TimeLa cotización indica el plazo de envío una vez acordados la configuración, la cantidad y el alcance del suministro.
Available Supply Configurations
- Cuerpo neumático identificado; su inclusión y cantidad deben indicarse en la cotización.
- Herramientas de trabajo adaptadas al vástago únicamente según lo indicado; su inclusión y cantidad deben indicarse en la cotización.
- Manguera, acoplamientos, lubricador y repuestos únicamente según lo indicado; su inclusión y cantidad deben indicarse en la cotización.
Export Packing
Especifique el destino, el método de transporte y las marcas requeridas. Acuerde la separación de los artículos, la protección de superficies/conexiones y los detalles de la lista de empaque para el suministro del ML33.
Warranty and After-Sales
Solicite los términos de garantía y piezas de desgaste junto con la cotización. Para obtener asistencia sobre el ML33, envíe la referencia del pedido, la identificación exacta de la pieza o modelo, el componente afectado y las condiciones de funcionamiento para poder identificar la configuración suministrada.
Safety and Maintenance Notes
Order Documentation
Factura comercial y lista de empaque detallada: acuerde el contenido requerido con el pedido.
Documentos de origen, inspección, prueba o transporte: indique los requisitos de destino/proyecto antes de cotizar; la disponibilidad debe confirmarse para la configuración ofrecida.
Frequently Asked Questions
What does this ML33 page identify?
This compressed-air impact-tool enquiry covers breaking or chipping equipment. Match the working tip, shank and retainer to the identified body, then check the working position and air available at the tool.
Will any pneumatic-breaker chisel fit?
No. The body must match the shank, collar and retainer as well as the desired point or blade. Send a drawing or measured old tool.
How do I select a duty class?
State material, removal task, working direction and access, then provide the site air supply. Any published model reference must be checked against the version offered.
Which configuration details are needed for quotation?
Provide exact model and revision; material and removal/breaking task; working direction and access; tool shank shape and dimensions; retainer and collar geometry; moil/chisel/blade shape and length. Also include available pressure and air flow; air inlet and hose/coupling; lubrication requirements; body-only/tooling/spares supply scope, quantity and destination. The offer should state the exact configuration for approval.
What is included in the supply?
The quotation itemizes the supply. Typical enquiry lines are: identified pneumatic body; shank-matched working tools only as listed; hose, couplings, lubricator and spare parts only as listed. No unlisted accessory or mating component is assumed included.
How are quantity, delivery and inspection requirements agreed?
Send the required quantity, destination and any packing or inspection requirement with the ML33 enquiry. MOQ, dispatch timing, warranty and document scope are stated in the written quotation for the agreed configuration.
Required Air and Tool Interfaces
Chisel, moil and retainer: Match the exact body, shank, collar and retainer geometry. Compressor and air-line equipment: Check delivered pressure/flow, hose bore, inlet and coupling standard.
Ready to Confirm the Configuration?
Request a Quote for ML33
We will confirm the body, working-tool shank, retainer, air supply, lubricator, hose fittings, spare parts and export packing.
- Product-specific quotation
- Interface confirmation
- Export packing options
Product Evidence
Product, Component, Configuration and Packing Views
Martillo neumático ML33. Esta consulta sobre herramientas de impacto por aire comprimido abarca equipos de rotura o cincelado. Haga coincidir la punta de trabajo, el vástago y el retenedor con el cuerpo identificado, luego verifique la posición de trabajo y el aire disponible en la herramienta.
Images support product identification and configuration discussion. Final supplied configuration, inspection scope and packing details are confirmed in the formal quotation.