{"product_id":"cir150-dth-button-bit","title":"CIR150 DTH Button Bit","description":"\u003cdiv class=\"perfomax-product-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eCIR150 DTH Button Bit\u003c\/strong\u003e is a low-pressure CIR-series down-the-hole rock drilling bit for a confirmed CIR150-compatible hammer and shank interface. Manufacturer references place the CIR150 family in the roughly \u003cstrong\u003e150–200 mm hole-diameter class\u003c\/strong\u003e, but published dimensions, exact diameter sets, button layouts, face profiles and weights vary by configuration. PerfoMax therefore treats those geometry fields as quotation-controlled rather than presenting one universal CIR150 specification.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buyers use the CIR150 bit family\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt around the \u003cstrong\u003eCIR150 DTH interface family\u003c\/strong\u003e, not a generic outside-diameter match.\u003c\/li\u003e\n\u003cli\u003eUsed in low-pressure DTH rock-drilling applications including mining, quarrying, water-well and construction drilling.\u003c\/li\u003e\n\u003cli\u003ePublic CIR150 references document multiple diameter and face\/button configurations, so the final geometry can be matched to the approved drilling requirement.\u003c\/li\u003e\n\u003cli\u003eModel-controlled ordering reduces the risk of mixing visually similar CIR130, CIR150 and CIR170 family parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConfirmed reference information\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eField\u003c\/th\u003e\n\u003cth\u003eConfirmed information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ family\u003c\/td\u003e\n\u003ctd\u003eCIR150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eLow-pressure DTH button bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference hole-diameter class\u003c\/td\u003e\n\u003ctd\u003eApproximately 150–200 mm across published CIR150 family references; exact ordered diameter must be confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched interface\u003c\/td\u003e\n\u003ctd\u003eCIR150-compatible hammer \/ shank family; exact mating geometry must be confirmed before order release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpline configuration\u003c\/td\u003e\n\u003ctd\u003eSix-spline CIR150 configurations are documented by multiple manufacturer references; exact shank dimensions remain order-controlled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace profile\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; supplier references document multiple DTH face designs, including flat, concave and convex variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eButton layout\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm gauge\/front button count, carbide diameter and button profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlushing layout\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm flushing-hole number and position\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit weight\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; published CIR150 figures differ by geometry and supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eTechnical note: the CIR150 name identifies a model\/interface family, not one universal finished-bit geometry. Final acceptance should follow the approved quotation, drawing or sample for the ordered configuration.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eCIR-series DTH bits are used for rock drilling in mining and quarry operations, water-well drilling, construction engineering and related geological drilling work. Final selection should consider the matched hammer, target hole diameter, rock condition and required face\/button configuration.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and ordering checks\u003c\/h2\u003e\n\u003cp\u003eDo not select a CIR150 bit by nominal hole diameter or visual similarity alone. Before order release, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe matched hammer model and CIR150-compatible shank\/interface;\u003c\/li\u003e\n\u003cli\u003etarget hole diameter and any clearance or reaming requirement;\u003c\/li\u003e\n\u003cli\u003eexact tail-shank dimensions and spline geometry;\u003c\/li\u003e\n\u003cli\u003eface profile required for the drilling condition;\u003c\/li\u003e\n\u003cli\u003egauge\/front button count, button diameter and carbide profile;\u003c\/li\u003e\n\u003cli\u003eflushing-hole number and position;\u003c\/li\u003e\n\u003cli\u003erock formation, drilling conditions and expected wear environment;\u003c\/li\u003e\n\u003cli\u003equantity, inspection evidence, marking and packing requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e nearby CIR-family models can overlap in nominal diameter. A diameter match alone does not prove hammer\/bit interchangeability; interface confirmation has priority.\u003c\/p\u003e\n\n\u003ch2\u003eSupply scope\u003c\/h2\u003e\n\u003cp\u003eThe standard quotation can cover the CIR150 DTH button bit in the buyer-approved configuration. DTH hammer, drill pipe, couplings, adapters, spare parts and other drilling-system components are not assumed to be included unless explicitly listed in the quotation.\u003c\/p\u003e\n\n\u003ch2\u003eQuality and inspection\u003c\/h2\u003e\n\u003cp\u003eFor a model-controlled DTH bit, inspection should focus on attributes that determine fit and drilling behavior. Depending on the order, the inspection record can be aligned to the approved specification and include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emodel \/ order identification and supplied quantity;\u003c\/li\u003e\n\u003cli\u003eoverall bit diameter and critical shank-interface dimensions;\u003c\/li\u003e\n\u003cli\u003espline profile and mating geometry;\u003c\/li\u003e\n\u003cli\u003eface profile, gauge\/front button arrangement and button condition;\u003c\/li\u003e\n\u003cli\u003eflushing-hole arrangement;\u003c\/li\u003e\n\u003cli\u003evisible machining and surface condition;\u003c\/li\u003e\n\u003cli\u003epacking condition and buyer-required marking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf a drawing, approved sample or signed specification is part of the purchase order, that approved document should control acceptance rather than a generic CIR150 family table.\u003c\/p\u003e\n\n\u003ch2\u003eMOQ, lead time and packaging\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMOQ:\u003c\/strong\u003e confirmed by quotation for the selected configuration and quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e confirmed after the CIR150 geometry and order quantity are locked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e export packing is selected according to bit size, quantity and shipping method. Special labeling or buyer packing instructions should be stated in the RFQ.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs every CIR150 DTH bit interchangeable?\u003c\/h3\u003e\n\u003cp\u003eNo. CIR150 identifies an interface\/model family, while public supplier data shows multiple diameter and geometry configurations. Confirm the exact shank, face, button and flushing details before substitution.\u003c\/p\u003e\n\n\u003ch3\u003eWhat diameter is a CIR150 DTH bit?\u003c\/h3\u003e\n\u003cp\u003ePublished CIR150 family references cover roughly the 150–200 mm class, but the exact available diameters differ by configuration and supplier. State the required hole diameter in the RFQ and confirm the final approved bit geometry.\u003c\/p\u003e\n\n\u003ch3\u003eWhat should I send for a CIR150 quotation?\u003c\/h3\u003e\n\u003cp\u003eSend the matched hammer model, target hole diameter, current bit\/shank photos or drawing if available, preferred face\/button configuration, rock condition, quantity and any inspection or packing requirements.\u003c\/p\u003e\n\n\u003ch3\u003eCan I order a CIR150 bit by hole diameter only?\u003c\/h3\u003e\n\u003cp\u003eIt is not recommended. Similar nominal diameters can occur across neighboring CIR families. The hammer\/shank interface and detailed geometry should be verified together.\u003c\/p\u003e\n\n\u003ch3\u003eAre the hammer and drill pipe included?\u003c\/h3\u003e\n\u003cp\u003eNot unless the quotation explicitly includes them. This product page is for the CIR150 DTH button bit; other system components should be listed separately in the RFQ.\u003c\/p\u003e\n\n\u003ch2\u003eRelated products and categories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/dth-tools\"\u003eDTH Tools\u003c\/a\u003e — browse the current DTH product family.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/drill-bits\"\u003eDrill Bits\u003c\/a\u003e — review other drill-bit categories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRequest a quote\u003c\/h2\u003e\n\u003cp\u003eFor a safe CIR150 match, send your hammer model, required hole diameter, current bit\/shank photos or drawing, rock condition and quantity. We will confirm the interface and order-specific geometry before finalizing the quotation.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003e\u003cstrong\u003eRequest a CIR150 DTH bit quotation\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eTechnical review basis: CIR150 identity and reference range were cross-checked against Realon CIR-series DTH bit data and independent CIR150 manufacturer tables. Conflicting geometry and weight fields are intentionally left quotation-controlled.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PerfoMax","offers":[{"title":"Default Title","offer_id":45757140369615,"sku":null,"price":0.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9308\/9999\/files\/perfomax-cir150-white-bg-v1.webp?v=1787378454","url":"https:\/\/perfomaxdrill.com\/products\/cir150-dth-button-bit","provider":" PerfoMax","version":"1.0","type":"link"}