{"product_id":"cir130-low-pressure-dth-hammer","title":"CIR130 Low-pressure DTH Hammer","description":"\u003cdiv class=\"perfomax-product-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eCIR130 Low-pressure DTH Hammer\u003c\/strong\u003e is a CIR-series down-the-hole hammer for low-air-pressure rock drilling. Multiple independent manufacturer references identify CIR130 as a distinct low-pressure hammer family and consistently show a \u003cstrong\u003e112 mm reference outside diameter\u003c\/strong\u003e with a \u003cstrong\u003e130–175 mm reference bit \/ hole-size range\u003c\/strong\u003e. Published CIR130 data differs, however, on hammer length, weight, working-pressure range, air consumption and exact bit-shank naming. PerfoMax therefore keeps those configuration-sensitive fields quotation-controlled instead of combining incompatible supplier tables.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buyers use the CIR130 hammer family\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the \u003cstrong\u003eCIR130 low-pressure DTH system family\u003c\/strong\u003e, rather than selected only by outside appearance.\u003c\/li\u003e\n\u003cli\u003eCommonly used in mining, quarrying, water-well and construction rock-drilling applications.\u003c\/li\u003e\n\u003cli\u003eThe 112 mm body diameter and 130–175 mm manufacturer-reference bit range provide a useful preliminary sizing check before the exact order configuration is locked.\u003c\/li\u003e\n\u003cli\u003eConnection, shank and compressor requirements are confirmed before order release to reduce the risk of mixing similar CIR-family components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConfirmed reference information\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eField\u003c\/th\u003e\n\u003cth\u003eConfirmed information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ family\u003c\/td\u003e\n\u003ctd\u003eCIR130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eLow-pressure DTH hammer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference outside diameter\u003c\/td\u003e\n\u003ctd\u003e112 mm — consistent across multiple CIR130 manufacturer references\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference bit \/ hole-size range\u003c\/td\u003e\n\u003ctd\u003e130–175 mm — common CIR130 manufacturer reference range; final ordered bit must still be confirmed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHammer length\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; published CIR130 references are not identical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit weight\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm supplied version by quotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure \/ air consumption\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm against the selected hammer version and compressor data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop-sub connection\u003c\/td\u003e\n\u003ctd\u003eConfirm exact thread \/ drill-pipe connection before order release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched bit \/ shank\u003c\/td\u003e\n\u003ctd\u003eConfirm actual CIR130 mating profile from drawing, current bit, hammer identification or approved quotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eTechnical note: CIR130 supplier data is not fully uniform. Some manufacturers label the relevant bit interface as CIR130, while others group certain sizes under CIR110\/CIR130. This page therefore does not claim universal interchangeability from the model name alone.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eCIR130 low-pressure DTH hammers are documented for rock drilling in \u003cstrong\u003emining, quarrying, water-well drilling and construction\u003c\/strong\u003e. The correct operating setup depends on the rock formation, target hole diameter, selected bit, compressor capability and drill-rig configuration.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and ordering checks\u003c\/h2\u003e\n\u003cp\u003eA CIR130 hammer should not be ordered from nominal diameter or appearance alone. Before production or shipment, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003etarget hole diameter and selected DTH bit configuration;\u003c\/li\u003e\n\u003cli\u003ethe exact bit shank \/ mating geometry required by the supplied CIR130 hammer;\u003c\/li\u003e\n\u003cli\u003etop-sub thread and the drill-pipe connection used on the rig;\u003c\/li\u003e\n\u003cli\u003ecompressor working pressure and available air volume;\u003c\/li\u003e\n\u003cli\u003erock formation and expected drilling condition;\u003c\/li\u003e\n\u003cli\u003erequired hammer body dimensions where rig clearance is critical;\u003c\/li\u003e\n\u003cli\u003espare-parts requirement, inspection evidence, quantity and packing instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e CIR110, CIR130 and other CIR-series hammers and bits can share similar proportions or overlapping nominal diameters. Do not treat them as interchangeable until the mating profile and connection are dimensionally verified.\u003c\/p\u003e\n\n\u003ch2\u003eSupply scope\u003c\/h2\u003e\n\u003cp\u003eThe quotation can cover the CIR130 low-pressure DTH hammer in the buyer-approved configuration. DTH bit, drill pipe, adapters, couplings, lubricator, compressor, rig parts and spare-part kits are not assumed to be included unless they are explicitly listed in the quotation.\u003c\/p\u003e\n\n\u003ch2\u003eQuality and inspection\u003c\/h2\u003e\n\u003cp\u003eFor a model-controlled DTH hammer, acceptance should focus on the features that determine fit, system integration and supplied configuration. Depending on the purchase requirement, the inspection record can be aligned to the approved specification and check:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emodel \/ order identification and supplied quantity;\u003c\/li\u003e\n\u003cli\u003eoutside diameter and other agreed dimensional checkpoints;\u003c\/li\u003e\n\u003cli\u003etop-sub thread and connection condition;\u003c\/li\u003e\n\u003cli\u003edriver\/chuck and bit-mating geometry against the approved configuration;\u003c\/li\u003e\n\u003cli\u003evisible machining, surface condition and assembly completeness;\u003c\/li\u003e\n\u003cli\u003especified spare parts and packing completeness;\u003c\/li\u003e\n\u003cli\u003elabeling and buyer-required inspection evidence where agreed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf a drawing, approved sample, current mating bit or signed specification forms part of the purchase order, that approved evidence should control acceptance instead of a generic CIR130 catalog table.\u003c\/p\u003e\n\n\u003ch2\u003eMOQ, lead time and packaging\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMOQ:\u003c\/strong\u003e confirmed by quotation for the selected configuration and order quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e confirmed after the hammer configuration, connection and quantity are locked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e export packing is selected according to hammer size, quantity and shipping method. Special labeling, spare-parts packing or buyer packing instructions should be stated in the RFQ.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat hole size is CIR130 normally associated with?\u003c\/h3\u003e\n\u003cp\u003eMultiple CIR130 manufacturer references use a 130–175 mm bit \/ hole-size range. Treat this as a model-family reference, not a substitute for confirming the actual bit and shank supplied with your order.\u003c\/p\u003e\n\n\u003ch3\u003eIs every CIR130 hammer compatible with every CIR130-labeled bit?\u003c\/h3\u003e\n\u003cp\u003eDo not assume so. Public supplier tables use different shank naming conventions, including CIR130 and shared CIR110\/CIR130 labels for some configurations. Confirm the actual mating profile or approved drawing before substitution.\u003c\/p\u003e\n\n\u003ch3\u003eWhat compressor information should I send?\u003c\/h3\u003e\n\u003cp\u003eSend the available working-pressure range, air delivery \/ flow data and compressor model if known. Published CIR130 pressure and air-consumption data varies by manufacturer and configuration, so the compressor match should be confirmed for the supplied hammer rather than inferred from a generic value.\u003c\/p\u003e\n\n\u003ch3\u003eWhat information is needed for a CIR130 quotation?\u003c\/h3\u003e\n\u003cp\u003eSend the target hole diameter, current hammer\/bit photos or identification, bit-shank information or drawing if available, drill-pipe\/top-sub connection, compressor data, rock condition, quantity and any inspection or packing requirement.\u003c\/p\u003e\n\n\u003ch3\u003eAre the DTH bit and drill pipe included?\u003c\/h3\u003e\n\u003cp\u003eNot unless the quotation explicitly includes them. This page is for the CIR130 low-pressure DTH hammer; bits, pipes, adapters and other system components should be listed separately in the RFQ.\u003c\/p\u003e\n\n\u003ch3\u003eCan I replace a CIR110 hammer with CIR130 because the sizes look close?\u003c\/h3\u003e\n\u003cp\u003eNo replacement should be approved from appearance alone. Verify the bit interface, top-sub connection, body clearance, target hole size and compressor requirements before changing hammer families.\u003c\/p\u003e\n\n\u003ch2\u003eRelated products and categories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/dth-tools\"\u003eDTH Tools\u003c\/a\u003e — browse the current DTH drilling-tool family.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/drill-bits\"\u003eDrill Bits\u003c\/a\u003e — review bit families when preparing the matched drilling system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRequest a quote\u003c\/h2\u003e\n\u003cp\u003eFor a safe CIR130 match, send your target hole diameter, current hammer\/bit identification or photos, drill-pipe connection, compressor pressure and air-flow data, rock condition and quantity. We will use the confirmed order configuration rather than a generic family table as the final supply basis.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003e\u003cstrong\u003eRequest a CIR130 DTH hammer quotation\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eTechnical review basis: CIR130 identity, 112 mm reference outside diameter and 130–175 mm reference bit range were cross-checked against Realon and independent CIR130 manufacturer data. Conflicting length, weight, pressure, air-consumption and shank-label fields are intentionally left quotation-controlled.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PerfoMax","offers":[{"title":"Default Title","offer_id":45757139550415,"sku":null,"price":0.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9308\/9999\/files\/perfomax-cir130-dth-hammer-white-bg-v1.webp?v=1787428820","url":"https:\/\/perfomaxdrill.com\/products\/cir130-low-pressure-dth-hammer","provider":" PerfoMax","version":"1.0","type":"link"}