{"product_id":"cir110-dth-button-bit","title":"CIR110 DTH Button Bit","description":"\u003cdiv class=\"perfomax-product-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eCIR110 DTH Button Bit\u003c\/strong\u003e is a low-pressure CIR-series down-the-hole rock drilling bit for a confirmed CIR110 hammer\/shank interface. Public manufacturer data consistently identifies CIR110 as a distinct low-pressure DTH bit family, but published diameter ranges, tail-shank dimensions, button layouts and weights vary by manufacturer and configuration. PerfoMax therefore treats those geometry fields as quotation-controlled instead of presenting one universal specification.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buyers use the CIR110 bit family\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned around the \u003cstrong\u003eCIR110 DTH interface family\u003c\/strong\u003e rather than a generic outside-diameter match.\u003c\/li\u003e\n\u003cli\u003eUsed in low-pressure DTH rock-drilling workflows including mining, quarrying, water-well and general construction drilling.\u003c\/li\u003e\n\u003cli\u003eMultiple face and button configurations are documented for the CIR110 family, allowing the final geometry to be selected for the drilling condition and approved order specification.\u003c\/li\u003e\n\u003cli\u003eOrdering by confirmed shank\/interface, face geometry and button\/flushing layout reduces the risk of mixing visually similar CIR-family parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConfirmed reference information\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eField\u003c\/th\u003e\n\u003cth\u003eConfirmed information\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ family\u003c\/td\u003e\n\u003ctd\u003eCIR110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eLow-pressure DTH button bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMatched interface\u003c\/td\u003e\n\u003ctd\u003eCIR110 hammer \/ shank family; exact mating dimensions must be confirmed before order release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFace options\u003c\/td\u003e\n\u003ctd\u003eConvex and flat-face CIR110 configurations are documented in manufacturer reference tables; required face is confirmed by quotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBit diameter\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm target hole diameter and approved bit drawing \/ quotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eButton layout\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm gauge\/front button count, button diameter and carbide profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlushing layout\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm flushing-hole arrangement before production \/ shipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit weight\u003c\/td\u003e\n\u003ctd\u003eConfiguration-dependent; confirm against the selected bit geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eTechnical note: independent CIR110 supplier tables do not use one identical geometry set for all CIR110 bits. This page intentionally does not convert family-level reference data into an exact PerfoMax SKU specification without an approved order configuration.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eCIR-series low-pressure DTH bits are commonly used for rock drilling in mining and quarry work, water-well drilling and construction drilling. Final bit selection should be based on the actual rock formation, required hole diameter, matched hammer and the customer-approved face\/button configuration.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility and ordering checks\u003c\/h2\u003e\n\u003cp\u003eDo not select a CIR110 bit by outside appearance or nominal hole diameter alone. Before order release, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ethe matched hammer is a CIR110-compatible low-pressure DTH hammer;\u003c\/li\u003e\n\u003cli\u003etarget hole diameter and any reaming \/ clearance requirement;\u003c\/li\u003e\n\u003cli\u003eexact tail-shank dimensions, spline profile and mating interface;\u003c\/li\u003e\n\u003cli\u003eface profile: flat, convex or another approved configuration where available;\u003c\/li\u003e\n\u003cli\u003egauge\/front button count, button diameter and button profile;\u003c\/li\u003e\n\u003cli\u003eflushing-hole number and position;\u003c\/li\u003e\n\u003cli\u003erock formation, drilling conditions and expected wear environment;\u003c\/li\u003e\n\u003cli\u003erequired inspection evidence, quantity and packing method.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e CIR90, CIR110, CIR130 and other CIR-family tools can look similar. A nearby nominal diameter does not prove interchangeability. Interface confirmation takes priority over visual similarity.\u003c\/p\u003e\n\n\u003ch2\u003eSupply scope\u003c\/h2\u003e\n\u003cp\u003eThe standard quotation can cover the CIR110 DTH button bit in the buyer-approved configuration. DTH hammer, drill pipe, couplings, adapters, spare parts and other drilling-system components are not assumed to be included unless they are explicitly listed in the quotation.\u003c\/p\u003e\n\n\u003ch2\u003eQuality and inspection\u003c\/h2\u003e\n\u003cp\u003eFor model-controlled DTH bits, inspection should focus on the attributes that determine fit and drilling behavior. Depending on the order, PerfoMax can align the inspection record to the approved specification and check:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003emodel \/ order identification and supplied quantity;\u003c\/li\u003e\n\u003cli\u003eoverall bit diameter and critical shank-interface dimensions;\u003c\/li\u003e\n\u003cli\u003espline profile and mating geometry;\u003c\/li\u003e\n\u003cli\u003eface profile, gauge\/front button arrangement and button condition;\u003c\/li\u003e\n\u003cli\u003eflushing-hole arrangement;\u003c\/li\u003e\n\u003cli\u003evisible machining, heat-treatment \/ surface condition and packing condition.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf a drawing, approved sample or signed specification is part of the purchase order, that approved document should control acceptance rather than a generic CIR110 family table.\u003c\/p\u003e\n\n\u003ch2\u003eMOQ, lead time and packaging\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMOQ:\u003c\/strong\u003e confirmed by quotation for the selected configuration and quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e confirmed after the CIR110 geometry and order quantity are locked.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e export packing is selected according to bit size, quantity and shipping method; special labeling or buyer packing instructions should be stated in the RFQ.\u003c\/p\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs every CIR110 DTH bit interchangeable?\u003c\/h3\u003e\n\u003cp\u003eNo. CIR110 identifies the interface family, but published supplier tables show multiple diameters, face styles and button arrangements. Confirm the exact shank geometry and ordered bit configuration before substitution.\u003c\/p\u003e\n\n\u003ch3\u003eWhat information should I send for a CIR110 bit quotation?\u003c\/h3\u003e\n\u003cp\u003eSend the matched hammer model, target hole diameter, current bit photos or drawing if available, face\/button preference, rock condition, quantity and any required inspection or packing standard.\u003c\/p\u003e\n\n\u003ch3\u003eCan I order by hole diameter only?\u003c\/h3\u003e\n\u003cp\u003eIt is not recommended. Similar hole diameters can exist across different CIR families. The hammer\/shank interface and detailed bit geometry should be verified together.\u003c\/p\u003e\n\n\u003ch3\u003eWhich face shape should I choose?\u003c\/h3\u003e\n\u003cp\u003eManufacturer references document more than one CIR110 face configuration. The correct choice depends on rock condition and the drilling setup, so the requested face should be locked in the quotation rather than inferred from the model name.\u003c\/p\u003e\n\n\u003ch3\u003eAre the hammer and drill pipe included?\u003c\/h3\u003e\n\u003cp\u003eNot unless the quotation explicitly includes them. This product page is for the CIR110 DTH button bit; system components should be listed separately in the RFQ.\u003c\/p\u003e\n\n\u003ch2\u003eRelated products and categories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/dth-tools\"\u003eDTH Tools\u003c\/a\u003e — browse the current DTH product family.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/drill-bits\"\u003eDrill Bits\u003c\/a\u003e — review other drill-bit categories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRequest a quote\u003c\/h2\u003e\n\u003cp\u003eFor a safe CIR110 match, send your hammer model, required hole diameter, current bit\/shank photos or drawing, rock condition and quantity. We will confirm the interface and order-specific geometry before finalizing the quotation.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003e\u003cstrong\u003eRequest a CIR110 DTH bit quotation\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003csmall\u003eTechnical review basis: CIR110 identity and reference configurations were cross-checked against Good Drill CIR110 DTH bit data and independent DTH-tool manufacturer tables. Conflicting manufacturer geometry fields are intentionally left quotation-controlled.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"PerfoMax","offers":[{"title":"Default Title","offer_id":45757140304079,"sku":"PM-DTH-BIT-05","price":0.0,"currency_code":"CNY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0656\/9308\/9999\/files\/perfomax-cir110-white-bg-v1.jpg?v=1787374977","url":"https:\/\/perfomaxdrill.com\/products\/cir110-dth-button-bit","provider":" PerfoMax","version":"1.0","type":"link"}